Multipurpose Solar Equipment of SOLART-SYSTEM LTD.

Content:

MULTIPURPOSE EDUCATIONAL SOLAR POWER SUPPLY

SOLAR POWER MEASURING UNIT & BACK UP BAG

MULTIPURPOSE EDUCATIONAL SOLAR THERMAL UNIT

MULTIPURPOSE EDUCATIONAL SOLAR POWER SUPPLY

• The Multipurpose Educational Solar Power Supply MESPS of SOLART-SYSTEM LTD. is an excellent tool to study the electrical utilization of the solar energy at different latitude. The MESPS is not only a simply study aid device, but a solar power supply providing electricity for other study aid devices like radios, TV sets, videos, PCs and for lighting, water pumping, irrigation etc. as well.

• The construction of MESPS of SOLART-SYSTEM LTD. is uniform modular structure. The approx. 2 m2 solar module field is mounted for an adjustable aluminum support, having holes for setting the tilt angles. The support has two stay plates. The stay plates are suitable for ground mounting of the MESPS. The stay plates have holes for fixing the equipment. The stay plates could be also loaded by bricks or any other heavy materials without using screws for fixing. The Control Box of MESPS consisting of the control electronic, the program switch, the junctions and measuring terminals is fixed on the rear side. The Batteries lay on the rear stay plate resulting heavy load for fixing the equipment. Both the Control Box and batteries can also be set separately.

• The main techninal data of MESPS of SOLART-SYSTEM LTD. are as follows:

           Nominal Voltage:                                  24 VDC

           Load current max.:                               12 ADC

           Peak power of the solar modules: 240 Wp

           Timered load : 6 programs within a week period

           Measuring: Voltages, currents digitally

           Monitoring: daily charges, discharges, voltage ranges etc. (back to 30 days) 

           Tilt angle: changable between 30-60 (10-30) degrees with steps 5 degree

           PC connection: RS 232 + software

 ·    Some options of MESPS of SOLART-SYSTEM LTD. are also provided like

           DC-AC inverters

           Meteorological measuring and monitoring station

·      The modular construction of MESPS of SOLART-SYSTEM LTD. makes its multiplication possible. To need more electricity to use more equipment!

SOLAR POWER MEASURING UNIT & BACK UP BAG (SPMUBB)

·        At measuring and putting into operation on site electricity is generally needed. In many cases the energy demand is not high at all because only small equipment are needed to operate like measuring instruments, PCs (laptops, notebooks), data acquisition systems etc. But the forms of electricity demand are different.

·        At development, installation, putting into operation, checking of renewable energy equipment number of measurements are needed. These equipment are situated almost all cases in the open air and they are generally far from the public electrical network.

·        In education mainly at the renewable energy the field tests and demonstrations electricity is similarly in most cases needed. For measuring and checking mostly electrical instruments, electronic devices are needed like data processing, telecommunication, occasionally videos etc.

·        At these field tests, demonstrations and putting into operation far from the public electrical network the electricity is generally provided by small power station like batteries or internal combustion engine-generator. But in some cases the transportation and operation continously of these small power stations make difficulties.

·        The portable measuring instruments, data acquisition systems and PCs have generally own energy sources, but their operation are limited. So for a longer test it must provide for changing or recharging these energy sources.

·        At field tests in the open air the electricity is practically provided by solar energy. The solar photovoltaic power source produces electricity directly from the solar energy. The electrical energy produced can use directly or it can storage in batteries. The solar power supply unit developed suitable provide electricity continuously and in different shapes and ranges as well.

·    The SOLAR POWER MEASURING & BACK UP BAG, SPMBB OF THE SOLART-SYSTEM LTD. IS A SMALL PORTABLE POWER STATION PROVIDING ELECTRICITY FROM THE SOLAR ENERGY. IT CAN BE USED AT FIELD TESTS, PUTTING INTO OPERATION, DEVELOPING AND EDUCATIONAL DEMONSTRATION AS WELL. THE ELECTRICITY IS PROVIDED IN DIFFERENT SHAPES AND RANGES. FURTHERMORE IT HAS OWN INSTRUMENT BEEING SUITABLE FOR MEASURING AND REGISTRATION WITH PC INTERFACE.

 ·       The main technical data of SPMBB of SOLART-SYSTEM LTD. are as follows:

             Output power: max. 100 W

             Nominal Voltages: 4,5...9VDC, 12VDC, 24VDC, 220VAC 50Hz

             Energy converter: silicon solar cells; can be set up separately

             Energy storage: sealed lead-acid battery

             Charge control: electronic

             Measuring ranges: 0,1 mV-1000VDC; 0,1 mV-750VAC; 0,1 Ohm - 40 MOhm;

                                                  0,1 microA - 20 ADC; 0,1 mikroA - 20 AAC; 0,1 nF- 400 microF;

                                                  10 microH - 400 mH; 4 MHz; - 40 degreeC - 1200 degreeC;

             C-MOS signal output 1-10-100 kHz

             Dual LCD display(analog-digital)

             Max. min. storage

             True RMS

             PC interface: RS 232

             PC power socket: 6x Ø 2.1 mm 4,5...9VDC, 12VDC, 24VDC (+/-)

             Portable

             Dimension: 460x 335x 150 mm

             Mass: 8 kg

MULTIPURPOSE EDUCATIONAL SOLAR THERMAL UNIT

• The Multipurpose Educational Solar Thermal Unit MESTU of SOLART-SYSTEM LTD. is an excellent tool to study the thermal utilization of the solar energy at different latitude. The MESPS is not only a simply study aid device, but a solar hot water system for school, washing etc. as well.

• The construction of MESTU of SOLART-SYSTEM LTD. is uniform modular structure. The approx. 2 m2 solar collector is mounted for an adjustable aluminum support, having holes for setting the tilt angles. The support has two stay plates. The stay plates are suitable for ground mounting of the MESPS. The stay plates have holes for fixing the equipment. The stay plates could be also loaded by bricks or any other heavy materials without using screws for fixing. The Control Box of MESTU consisting of the control electronic, the junctions and measuring terminals is normaly fixed on the rear side. The hot water storage tank, circulating pump, pressure equalizer lay on separately.

• The main techninal data of MESTU of SOLART-SYSTEM LTD. are as follows:

             Preassure in operation max. 3 bar

             Flow rate 70-90 liter/hour

             Nominal Voltage 220 VAC 50Hz

             Storage tank 150 l (insulated)

             Auxiliary heating electric 220V/1.8 kW

             Tilt angle changable between 30-60 degrees with steps 5 degree

·       Some options of MESTU of SOLART-SYSTEM LTD. are also provided like 

             DC control electronic

             DC circulating pump

             Monitoring systems

             DC, AC instruments

             Meteorological measuring and monitoring station

      ·      The modular construction of MESTU of SOLART-SYSTEM LTD. makes its multiplication possible. To need more hot water to use

           more equipment!

·    The MESTU of SOLART-SYSTEM LTD. is well completed by the Multipurpose Educational Solar Power Supply MESPS.